Homes with an air conditioning unit or air-to-air heat pump on the wall and ECO4: questions UK households ask before install day (guide 2026)
Guide by ApplyFreeBoiler.uk (Reliant Energy Solutions Ltd), a heating and insulation installer in Bury, Greater Manchester. We are not the government, Ofgem or an energy supplier.
More UK homes now have a wall-mounted air conditioning unit or an air-to-air heat pump, with an indoor unit high on a wall and an outdoor fan unit on a bracket or on the ground outside. When ECO4 external wall insulation, cavity wall insulation or a new boiler flue is being planned, households often ask what happens to the outdoor unit and the pipes that run through the wall. This guide covers questions households commonly ask. It is general information from ApplyFreeBoiler.uk, a heating and insulation installer in Bury. What is recommended depends on the survey and the scheme rules at the time. This page does not guarantee funding, and it is not legal, tax or insurance advice.
1. Point out the indoor and outdoor units
Show the surveyor where the indoor unit is, where the outdoor unit sits and where the pipes and cables pass through the wall. Mention who fitted it, if you know.
2. Outdoor units on brackets
With external wall insulation, an outdoor unit fixed to the wall on brackets may need to be taken down and refitted further out on longer brackets. Ask whether this is included in the work and who will do it.
3. Refrigerant pipes through the wall
Air conditioning units have refrigerant pipes, and working on them is a job for a suitably qualified engineer. Ask the installer not to disturb them unless that has been arranged, and how the insulation will be finished and sealed around the pipes.
4. Drainage and condensate
These units often have a small drain pipe that drips water outside. Ask where it will run after the work so water does not run down the new wall finish or soak into the insulation.
5. Airflow around the outdoor unit
Outdoor units need space around them to work well. Check that scaffolding, materials or new wall finishes will not leave the unit boxed in, and that it is kept clear while work goes on.
6. Flues and clearances
If a new boiler flue is planned on the same wall, ask whether its position keeps a sensible distance from the outdoor unit, so the fan does not draw in fumes or steam.
7. Switch off and check afterwards
Ask whether the unit should be switched off during the work. Afterwards, check it runs normally, that nothing is rattling and that no water is leaking indoors.
8. Check funding and local figures
See ECO measures by council on ApplyFreeBoiler.uk, built from DESNZ Household Energy Efficiency statistics, to see how many ECO measures have been installed in your local authority area. Use the ApplyFreeBoiler.uk eligibility check to see whether an ECO4 heating or insulation pathway may be available for your home in England, Scotland or Wales. ECO4 is due to close on 31 December 2026.